Product Code

$$POA

BridgeCam Welding Gauge. Is an all in one gauge welding gauge for measuring Weld: Undercut, Excess material, Fillets, Weld size and Height, Preparation angle and Misalignment.

Product Code

$$POA

Welding Hi-Lo gauge. Measures internal misalignment, Fit-up gap, Bevel on Pipe and Plate end preparation, Crown height, and Pipe and Plate wall thickness.

Product Code

0491

$$POA

V-WAC Welding Gauge. Measures undercut, Crown height and checks porosity size.

Product Code

0492

$$POA

Weld Fillet Gauges. Combined set of gauges to measure concave or convex weld sizes for 3mm to 25mm.

Product Code

000000

$$POA

Digital Welding gauge with similar function to the BridgeCam.

ES-X Magnetic Particle Tester

Product Code

$$POA

ES-X Magnetic Particle Tester. Magnetises materials for magnetic particle testing. lightweight with articulated legs making it ideal for all applications. No current flows through the inspection piece therefore eliminating localised heating and arc burns which later can become failure defects. Meets or exceeds MIL-STD-271E. PCWI supplies the yoke only.

Pit and Crack Depth Gauge

Product Code

1017, 0122

$$POA

PCWI Metric Pit & Crack depth and Corrosion Gauge.
Measures, the depth of pits, cracks and craters of the surfaces of steel structures, pipes and concrete. Enables quick assessment of surface condition. The slender tip allows for the depth measurement of narrow cracks and corrosion. An essential gauge for pipe layers/coaters, enabling them to make a quick assessment of the condition of pipework during rehabilitation.

Digital Pit and Crack depth Gauge

Product Code

0917

$$POA

PCWI Digital Metric/Imperial Pit, Crack, Scratch and Corrosion depth Gauge. This Digital gauge measures, the depth of pits, cracks and craters of the outer (in some instances it would do the inside) surfaces of steel structures, pipes and concrete. Enables quick assessment of surface condition. The slender tip allows for the depth measurement of narrow cracks and corrosion. An essential gauge for the Corrosion Industry, pipeline layers / coaters, enabling them to make a quick assessment of the condition of pipework during rehabilitation

Digital Pit and Crack Gauge 125mm foot

Product Code

0923

$$POA

PCWI Digital Metric/Imperial extended foot, Pit, Crack, Scratch and Corrosion depth Gauge. This Digital gauge measures, the depth of pits, cracks and craters of the outer (in some instances it would do the inside) surfaces of steel structures, pipes and concrete. Enables quick assessment of surface condition. The slender tip allows for the depth measurement of narrow cracks and corrosion. An essential gauge for pipe layers/coaters, enabling them to make a quick assessment of the condition of pipework during rehabilitation.
With an extended 125mm foot enabling measurement on heavily pitted work. Dial indicator can be repositioned in the end for easy measurement in corners.

AC/DC Clamp Meter Amp Meter

Product Code

$$POA

This is a AC and DC Current meter, Amp Meter, Volt meter. True RMS Tong tester.

Clamp meter can be used for electrical tests, and for welders and welding.
Current: 0 - 1000A AC & DC.
Voltage: 0 - 1000V AC & DC.
Resistance: 0 - 40 meg ohm.
Frequency: 0 to 400KHz