PosiTector 6000 I Coating Thickness Paint Gauge

Product Code 0414,

0415, 0419, 0421, 0424, 0426

$$POA

PosiTector 6000 I.  Integral Probe Model Positector 6000 Coating Thickness / Paint gauge is supplied as a Basic, Standard, or Top (Memory) model.
Ferrous Gauge F, Measures non-magnetic coatings on steel.
Non-Ferrous Gauge NF, Non-conductive coatings on aluminium, brass etc.
Ferrous and Non-Ferrous gauge FN, Measures both, non-magnetic coating on steel AND non-conductive coatings on aluminium, brass etc, AUTOMATICALLY recognises the substrate and takes a measurement.

PosiTector 6000 S Coating Thickness Paint Gauge

Product Code 0425,

0427-29, 0430-31, 0435-37

$$POA

PosiTector 6000 S. Separate Probe Model. This Paint gauge/coating thickness gauge is supplied, as a Basic, Standard, or Top (Memory) model.
Separate probe gauges accommodate various interchangeable probes. Extended probe cable is available.
Ferrous Gauge F, Measures non-magnetic coatings on steel.
Non-Ferrous Gauge NF, Measures Non-conductive coatings on aluminium, brass etc.
Ferrous and Non-Ferrous gauge FN, Measures both, non-magnetic coating on steel AND non-conductive coatings on aluminium, brass etc, AUTOMATICALLY recognises the substrate and takes a measurement.

PosiTest DFT Coating Thickness Paint Gauge

Product Code

0980, 0985

$$POA

DeFelsko, PosiTest DFT.  Coating and Paint Thickness Gauge - Small easy to use!! TWO MODELS
Positest DFT Ferrous F, and Combo Ferrous/Non Ferrous FN. Gauges.
PosiTest DFT Ferrous F, Measures non-magnetic coatings on steel.
PosiTest DFT Combo FN, Measures both non-magnetic coating on steel AND non-conductive coatings on aluminium, brass etc.
AUTOMATICALLY recognises the substrate and takes a measurement. No calibration required for most applications.

Budget 8000 Series (Integral) Coating Thickness Gauge

Product Code

1023-1025

$$POA

• Low Cost Option - Microcomputer based, auto-detection of the probe type.
• Large LCD Screen, Flip display.
• Final 10 measurements in memory.
• Metric/imperial system selectable: auto power off.
• F (Ferrous)
• FNF (Ferrous - Non Ferrous)

Budget 8000 Series (Separate Probe) Coating Thickness Gauge

Product Code

1027-1028

$$POA

• Low Cost Option - Microcomputer based
• Metric/imperial system selectable
• Seperate probe Model
• Low Battery Indicator, auto power off
• F (Ferrous)
• F/NF (Ferrous & Non Ferrous)

PosiTector 200 Coating Thickness Paint Gauge

Product Code

0981-0984

$$POA

NEW RELEASE DeFelsko PosiTector 200.
Non-destructive ultrasonic coating thickness gauge for measuring coatings on Concrete, Wood, plastics, Composite materials and more. Available in standard & advanced models. Standard models measure the total thickness of a coating system and the advanced models measure the total thickness or up to three layers in multi-layer system. Also features graphic read-out for detailed analysis of the coating system.

Digital Needle Coating Thickness Paint Gauge

Product Code

0918

$$POA

PCWI Digital Needle Gauge.
The miniature size (42mm diam) of this Coating Thickness Gauge makes it easy to use and balance on the surface. Available as metric/imperial. Data out also available. When a hole is made in the coating to the substrate, and the needle placed in the hole, the gauge will read the coating thickness. This gauge also doubles as a Surface Profile gauge. The special foot and 30deg sharp needle ensures measurements meet the requirements of AS3894.5-2002 (Surface Profile) and as far as we can ascertain it is the only gauge available within Australia which complies with the requirements of this Standard. Design of the unit permits accuracies equivalent to an electronic surface trace. The gauge can also be used for pit and crack depths.

PosiPen Coating Thickness Gauge

$$POA

PosiPen Coating Thickness Gauge can be placed with pin-point accuracy on any location of the part to be measured which other Gauges are not able to reach. PosiPen measures:

• on hot surfaces

• on small surfaces

• in different positions

PosiPen has a very small unique magnet and therefore can measure on extremely small parts, on peaks and valleys.

Dakota MMX-7 Ultrasonic Thickness Tester Gauge

$$POA

Dakota MMX-7 Ultrasonic Thickness Tester Gauge. Model MMX-7 calibratable Ultrasonic Thickness Gauge.
Use the Multi-mode feature to measure through and eliminate paint and coatings. The built-in transducer types offer increased linearity between transducers. Pulse-Echo Mode: pit & flaw detection measures from 0.025 to 9.999 inches (0.63 to 254mm). Echo-Echo Mode: thru paint & coatings measures from 0.050 to 4.0 inches (1.27 to 102mm) depending on thickness of coating. The high speed scan feature speeds up the inspection process by making 32 measurements per second.

DeFelsko PosiTest Manual Magnetic Coating Thickness Paint Gauge

Product Code

0288, 0289

$$POA

DeFelsko PosiTest F and G.
Application Type A. Measures non magnetic and non metallic coatings and Paint thickness on steel substrates. Used on Application Types A & C.
DeFelsko PosiTest F: 0 to 2000µm.
DeFelsko PosiTest G: 0 to 200µm.

Time TT260 Coating Thickness Paint Gauge

Product Code

0675

$$POA

Time Model TT-260. Coating Thickness Paint Gauge. Measures paint, plastics, enamel etc. plus copper or aluminium on plastics or PCB, and chromic coating on a copper substrate. Range: 0 to 1250µm (dependent on probe used). Application Types A, B, C. 2 Measuring modes: continuous/single. 2 Shutdown modes: manual/automatic. Wide measuring range with 5 probes available (next page) Direct testing mode and block statistics mode (APPL/BATCH) Direct print out of statistical values Dataview to connect with PC Complies with the requirements of Australian Standard AS3894.3-2002.

Elcometer® 345 - Now superseded

$$POA

Elcometer® 345. - This has now been superseded.
Production ceased on this very popular range of gauges in early 2001. However, repairs are still possible, with a large range of probes and spare parts still available. This service is also available for the following Elcometer® models: 245, 246, 256, 300 355, and 456. A range of alternate paint/coating thickness gauges are also available.
Check our USED SECTION for rebuilds or other coating thickness / paint gauge options which may be available

Micro-Metrics Paint Inspection Gauge (PIG)

Product Code

0017

$$POA

Micro-Metrics Paint Inspection Gauge (PIG).
Is a destructive paint gauge. One of three angled cutters is chosen, to cut an angled groove in the coating Measurement is made via the attached microscope through multiple layers to determine total and individual layer thickness of dry film coating on substrates such as Steel, Glass, Plastic and Concrete etc.

Elcometer® 456 Model Coating Thickness Gauges

$$POA

Elcometer® 456 Model.
Probes, repairs & spare parts are available for this range of Coating Thickness/Paint gauge. This service is also available for the following Elcometer® models: 245, 246, 256, 300, 345 and 355.

PCWI Coating Thickness Standard

Product Code

0119, 0120, 0525

$$POA

Calibration standards are a benchmark for checking and calibrating your Coating Thickness/Paint gauge and for your Quality Assurance Coating Procedures. Complies with the requirements of Australian Standard AS3894.3-2002. For calibrating and checking the accuracy of all coating thickness gauges/instruments. Ferrous and Non-ferrous Coating Thickness Standards show both combined imperial/metric ranges, with plate sizes from 6µm to 12.5mm. Supplied with NATA Endorsed Certificates and recertification is available. These International Standards are Proudly Manufactured in Australia by PCWI.

PCWI Measured Calibration Films

Product Code

0115-0118

$$POA

PCWI Measured Calibration Films are a Benchmark for Calibrating your Coating Thickness gauges and for your Quality Assurance (QA) Coating Procedures. Complies with the requirements of Australian Standard AS3894.3-2002. Also for calibrating and checking the accuracy of digital coating thickness gauges and instruments (not for manual magnetic gauges). PCWI Measured Calibration Films are available in Working Films sets and Certified sets.

Australian / International Zero Plates

Product Code

0272-0273, 0544, 0549, 0567

$$POA

PCWI Australian / International Zero Plates.
These Plates are used for setting a Benchmark zero on your Digital Coating Thickness / paint Gauge, and for your Quality Assurance QA Coating Procedures. These are made as Ferrous (steel), or Non-ferrous (aluminium). Use the Australian Zero Plates under your Calibration films. Complies with the requirements of Australian Standard AS3894.3-2002. Manufactured in Australia by PCWI.