Kolectric 8020 Covermeter ReBar Locator

Product Code

0301

$$POA

Kolectric 8020 MicroCovermeters, ReBar Locator.
This Cover Meter has additional features. Used for non-destructive locating and checking of Rebar steel reinforcement and rebar depth/size, in concrete structures, components, Bridges, Floors, Beams and Slabs.
Accurately determines position and direction of reinforcing bars. Measures exact concrete cover, whilst ignoring magnetic aggregate

Kolectric 7000 Micro Covermeter

$$POA

Kolectric 7000 (REPLACED by the 8000 SERIES) MicroCovermeter, ReBar Locator, Cover Meter.

**This unit has been replaced by the 8020**

Spare probes and servicing is still available for the 7000 series.

Concrete Surface Profile Gauge

Product Code

0918

$$POA

PCWI Digital Surface Profile Gauge This is a low cost Very accurate option for surface profile measurement. Design of unit permits accuracies equivalent to an electronic surface profile trace. Also a Pit & Crack Depth Gauge. The Dial size of  (57mm diam) of this unit makes it easy to use and easy to balance on the surface. The special stepped foot and 30deg sharp needle ensures measurements meet the requirements of Australian Standard 3894.5-2002 (Surface Profile).

This would have to be the most accurate method of surface profile measurement

Pit and Crack Depth

Product Code

0917, 0923

$$POA

PCWI Pit & Crack Gauge This digital gauge measures the depth of pits and cracks in concrete. Enables quick assessment of surface condition and the slender tip allows for depth measurement of narrow cracks. This can also be used for surface roughness. More Models in Pit and Crack

Positector 200 Coating Thickness Paint Gauge

Product Code

0981-0984

$$POA

DeFelsko PosiTector 200.
Non-destructive ultrasonic coating thickness gauge for measuring coatings on concrete, wood, plastics, composite materials and more. Available in standard & advanced models. Standard models measure the total thickness of a coating system and the advanced models measure the total thickness or up to three layers in multi-layer system. Also features graphic read-out for detailed analysis of the coating system.

Mega Check 80F-St Ultra Thickness Gauge

Product Code

0000

$$POA

Measures the thickness of ultra thick coatings, Plastics, Foam, insulation, rubber and cement on steel up to 80 mm Using the magnetic induction measuring method.
Digital graphic LCD display, backlight, Data Logger and serial interface RS 232

BDT-ST II Concrete Thickness Meter

Product Code

0000

$$POA

This portable device, which is especially easy to operate on construction sites, works according to the proven magnetic induction measuring technique and measures concrete layers up to 80 mm.

Micro-Metrics Paint Inspection Gauge (PIG)

Product Code

0017

$$POA

Micro-Metrics Paint Inspection Gauge (PIG).
Is a destructive paint gauge. One of three angled cutters is chosen, to cut an angled groove in the coating Measurement is made via the attached microscope through multiple layers to determine total and individual layer thickness of dry film coating on substrates such as Steel, Glass, Plastic and Concrete etc.

Visit our used section

$$POA

WE have a range of Used Equipment Second-hand Test Instruments, this could be New, Used, Superseded, Old Stock, Slightly Damaged or Scratched.
All items are in Useable Working Order.
Prices are in AUD and do not include GST.
All items come with a warranty period, this unit is sold,

Product Code

0870

$$POA

PCWI Concrete cure temperature Probe. Code: 0870
75mm in diameter x 75mm high, 25 mm steel internal weighted spring loaded centre.
The probe is used for temperature of; Curing concrete surfaces such as Large mass / flooring processes. Suits all K Type Digital Thermometers and temperature Dataloggers. Temp Range: -70 to 100°C

Moisture Datasheets - Downloadable

Protimeter Datasheets - Downloadable.
Moisture measurement, Moisture meter use, how and where. The clickable links go to 5 sets of datasheets. Moisture Meters by Protimeter.
Acrobat format for easy printing) will help define some common moisture problems and solutions.
For Customers who need to purchase a Moisture Meter / Detector for Testing Moisture in CONCRETE.

Concrete Testing and Instrumentation Links

Ian Godson & Associates, Corrosion and Remedial Engineers