Micro-Metrics Paint Inspection Gauge (PIG)

A destructive paint gauge. One of three angled cutters is chosen to cut an angled groove in the coating.

Measurement is made via the attached microscope through multiple layers, to determine total and individual layer thickness of dry film coating on substrates such as Steel, Glass, Plastic and Concrete etc.

Click images to enlarge
Micro-Metrics Paint Inspection Gauge (PIG)
  • MM Paint Inspection Gauge
  • MM Paint Inspection Gauge - Kit
  • MM Paint Inspection Gauge - Kit Contents
  • MM Paint Inspection Gauge - Case

Dry Film Thickness Gauge for destructive testing.

One of three angled cutters is chosen, to cut an angled groove in the coating. Measurement is made via the attached microscope through multiple layers to determine total and individual layer thickness of dry film coating on substrates such as Steel, Glass, Plastic and Concrete etc.

The Gradicle reads:

  • 2µm per div with a No 10 cutter (2 to 75µm)
  • 10µm with a No 2 cutter (12 to 500µm)
  • 20µm with a No 1 cutter (25 to 1270µm) 
  • Range: 2 to 1270µm
  • Magnification: 50x

View FileDatasheet - Micro-Metrics PIG    Size: (499.64 KB)

View all FAQ's

Ask a Question

No Faqs Found !

Specifications

Range 2 to1270µm
Magnification 50x
Resolution ±6µm ±3µm ±1µm
Scale Division 25µm 12µm 2.5µm
Dimensions 115mm x 90mm x 25mm
Weight 225 grams
Enquire about this product

Get pricing and any other information you need about this product by completing the form below.

Check any options &/or accessories you're interested in where available above, and complete the form.

 

Captcha

* Required Fields