PCWI Digital Surface Profile Gauge

Product Code

0918

$$POA

PCWI Digital Metric/Imperial Surface Profile Needle Gauge.
This is a low cost option to surface profile measurement. Design of the unit permits accuracies equivalent to an electronic surface profile trace. Also a Pit & Crack Depth Gauge.
The miniature size (42mm diam) of this unit makes it easy to use and easy to balance on the surface. The special stepped foot and 30deg sharp needle ensures measurements meet the requirements of Australian Standard 3894.5-2002 (Surface Profile)

Pit and Crack Depth Gauge

Product Code

0122

$$POA

PCWI Metric Pit & Crack depth and Corrosion Gauge.
Measures, the depth of pits, cracks and craters of the surfaces of steel structures, pipes and concrete. Enables quick assessment of surface condition. The slender tip allows for the depth measurement of narrow cracks and corrosion pitting. An essential gauge for pipe layers/coaters, enabling them to make a quick assessment of the condition of pipework during rehabilitation.

Digital Pit and Crack depth Gauge

Product Code

0917

$$POA

PCWI Digital Metric/Imperial Pit, Crack, Scratch and Corrosion depth Gauge. This Digital gauge measures, the depth of pits, cracks and craters of the outer (in some instances it would do the inside) surfaces of steel structures, pipes and concrete. Enables quick assessment of surface condition. The slender tip allows for the depth measurement of narrow cracks and corrosion. An essential gauge for the Corrosion Industry, pipeline layers / coaters, enabling them to make a quick assessment of the condition of pipework during rehabilitation

Digital Pit and Crack Gauge 125mm foot

Product Code

0923

$$POA

PCWI Digital Metric/Imperial extended foot, Pit, Crack, Scratch and Corrosion depth Gauge. This Digital gauge measures, the depth of pits, cracks and craters of the outer (in some instances it would do the inside) surfaces of steel structures, pipes and concrete. Enables quick assessment of surface condition. The slender tip allows for the depth measurement of narrow cracks and corrosion. An essential gauge for pipe layers/coaters, enabling them to make a quick assessment of the condition of pipework during rehabilitation.
With an extended 125mm foot enabling measurement on heavily pitted work. Dial indicator can be repositioned in the end for easy measurement in corners.

Magnifier 10x Illuminated With Graticule

Product Code

0237

$$POA

PEAK 2028 10x Illuminated Magnifier With Graticule, Illuminated Magnifier With Graticule.  This unit will measure the width of pinholes, pits, scratches and cracks. The magnifier with graticule is removable from the Illuminated handle. Graticule diam 32mm, Graticule scale 15mm to 0(centre) to 15mm. Overall 30mm measurement length in 0.100 mm graduations.