Coating Thickness Standards & Films (Shims)

PCWI manufacture coating thickness standards and shims and ultrasonic thickness gauge calibration blocks to support our range of coating thickness gauges and ultrasonic thickness gauges.

Because we manufacture these products we can provide you with exactly what you need. If you don’t see what you need in our product listing below call us and we can discuss producing what you do need.

Your coating thickness gauges need to be verified as accurate when applying coatings, so for ongoing calibration, they are supplied with a working set of calibration films. For a traceable reference, certified films and coated plate standards are available.

Certified films are usually replaced every 12 months, whereas coated plate standards are used for long-term and can be re-certified every 12-24 months. A certified standard allows you to have as many paint gauges as you require onsite which can be verified and certified yourself. Certified films or standards are purchased when a company requires them for their own Quality Assurance system, or to prove to a client or external auditor that the gauge has been checked and is reading accurately. Working films do not have the traceability of a certified film or coated plate standard.

PCWI can check the gauges and issue conformance certificates, but the goal is for the customer with certified films or standards to be able to verify their own gauges, saving them time and money. And in using certified films or standards, there’s no real need to send a gauge back to a supplier such as PCWI, unless it is faulty.

Products

5 Item(s)

per page

Grid  List 

Set Descending Direction
Switch View
  • Australian Zero Plates

    These Plates are used for setting a Benchmark zero on your Digital Coating Thickness/paint Gauge, and for your Quality Assurance QA Coating Procedures.

    These are made as Ferrous (steel), or Non-ferrous (aluminium)

    Enquire Product Details
  • Coating Thickness Standards

    For calibrating and checking the accuracy of all coating thickness gauges/instruments. Complies with the requirements of Australian Standard AS3894.3-2002.

    Ferrous and Non-ferrous Coating Thickness Standards with thicknesses ranging from 6µm to 20mm.

    Supplied with a report traceable to NMIA + NIST certified equipment and recertification is available.

    Enquire Product Details
  • Measured Calibration Films - Certified

    These Films are a low cost alternative to the Calibration Standards, although not for the long term as they cannot be recertified.

    These Calibration Films are available in Through-colour or Clear (the colour will not scratch off like colour-painted films).

    Supplied with a report traceable to NMIA + NIST

    Enquire Product Details
  • Measured Calibration Films - Working Sets

    These Films are a low cost alternative to the Calibration Standards, although not for the long term as they cannot be recertified.

    These Calibration Films are available in Through-colour or Clear (the colour will not scratch off like colour-painted films).

    Enquire Product Details
  • Ultrasonic Thickness Gauge Calibration Blocks

    A series of individual steel blocks for checking the linearity of ultrasonic thickness gauges and flaw detectors.

    Supplied with certification traceable to NMIA (Australia)& NIST (USA) Certified Equipment.

    Manufactured by PCWI.

    Enquire Product Details

5 Item(s)

per page

Grid  List 

Set Descending Direction
Switch View