Holiday Detector External Rolling Pipeline Brushes

Brass wire brushes 25mm to 600mm or custom made as required.

Suitable for all High Voltage Porosity detectors, holiday detectors, spark testers and jeepers.

Click images to enlarge
Holiday Detector External Rolling Pipeline Brushes
  • Porosity/Holiday Detector External Rolling Pipeline Brushes
  • Porosity/Holiday Detector External Rolling Pipeline Brushes
  • Porosity/Holiday Detector External Rolling Pipeline Brushes

Brass wire brushes 25mm to 600mm or custom made as required.

Suitable for all High Voltage Porosity detectors, holiday detectors, spark testers and jeepers.

  • Roller wheel mounted
  • Lightweight
  • Rolls easily over joints
  • Moves easily around bends
  • Splits for easy fitting
Large 1/2 circle or 1/3 circle brushes are also available

Adapters available for most brands/makes and models.

View FileDatasheet - Porosity Detector Accessories    Size: (385.16 KB)

View all FAQ's

Ask a Question

  • Are PCWI wire brushes interchangeable or compatible with competitive detectors and vice-versa?

    Yes, with suitable adaptors, which PCWI can manufacture to suit.

    How helpful was this ?

  • Will wire brush electrodes ensure good inspection even in corners and around irregular shapes where pinholes or bare spots (holidays) are likely to occur?

    Yes! PCWI Detectors can accommodate a complete range of brushes (see Brochure for illustrations).

    How helpful was this ?

  • The PCWI website shows maximum internal and external pipe-brushes at 20" (500mm). Can brushes of greater diameter be provided to complement the Detector?

    Brushes more than 20” (500mm) are large and difficult to handle. However, special large brushes can be made to order. Note: All coil sizes can be used in place of brushes where specification allows. Pipe joints and longitudinal welds should be tested with a brush.

    How helpful was this ?

  • Under what conditions are Carbon filled silicone-rubber brush electrodes of advantage?

    These can provide longer life but may require the application of higher voltages. They do not lay flat, and the welded areas should be tested with a brass brush. They should not be used on heavily corroded surfaces and textured coatings.

    How helpful was this ?

Specifications

Brush Wire 100µm brass wire
Size 25mm to 600mm or Custom size
Enquire about this product

Get pricing and any other information you need about this product by completing the form below.

Check any options &/or accessories you're interested in where available above, and complete the form.

 

Captcha

* Required Fields