Protimeter BLD9800-FL MMS3 Moisture Meter - Flooring Kit

Protimeter MMS3 Flooring Kit: For moisture measurements in concrete floor slabs using the relative humidity in-situ probe method.

The Proitmeter MMS3 Flooring Kits allow flooring inspectors to take moisture measurements in concrete floor slabs using the relative humidity in-situ probe method. The in-situ humidity test is being adopted worldwide and is considered the most accurate way for contractors and inspectors to ensure that moisture levels in concrete slabs meet the reccomended requirements prior to installing a floor covering.

Moisture levels in floor slabs are critical to understand, as excessive moisture can lead to catastrophic and expensive floor failures. Global standards are in place, such as ASTM F2170.

Applications

• Complete kit for in-situ relative humidity and temperature of concrete - required for ASTM F2170 Standard
• For checking the RH of concrete slabs prior to flooring installation or for investigating flooring failures
• Measures moisture content in and behind various materials using pin and non-invasive modes
• Wall moisture meter for measuring moisture content in wood, drywall, building materials, concrete, fibreglass
• Measure moisture behind surface coverings, behind ceramic tile and vinyl floor coverings, joists, around toilets, drywall, gyprock, below grade floors and walls, plaster, masonry, concrete and concrete block
• For Flooring Installers, Building Inspectors, Insurance assessors, Builders, Quality Assurance, Restoration, Moisture Investigation

Specifications

*Pinless range up to 19mm deep in standard mode and up to 12cm deep in sensitivity mode (varies with material under test).

BLD9800-FL Kit includes:

• MMS3 Instrument
• Hard Plastic Carry Case and Wrist Strap
• 5 Protimeter Mini Hygrostick Probes (BLD4755-5) + Inserstion/Extraction tool
• 20 Adjustable Humidity Sleeves (BLD4650-20)
• Quickstick ST (POL8751)
• Carbide Tipped Sprial Masonry Drill (19mm) + Wire Cleaning Brush
• Mini Hygrostick Extension Lead
• Salts Calibration Test Bottle and Adapter
• Instructions
• 2 x AA Batteries
• Two year warranty

Other MMS3 Kit Options:

The flooring kit is also availabe without the MMS3 Instrument: BLD4755-KIT Flooring Kit Excluding MMS3 Instrument

Other Product Variants:

Calibration:

• PCWI can service and calibrate Protimeter moisture meters. Contact us to arrange a quote.
• Calibration Interval: We recommend that customers establish calibration intervals based upon their own experience, work environment and qualtiy procedures. Based on our product knowledge, data and customer feedback, a one year calibration interval is a good starting point.

Training and Support:

• PCWI can step you through every aspect of your Protimeter instrument to ensure accurate and reliable measurements.
• We offer support by phone, email or video call to suit you.

Accessories:

Spare parts also available - contact us for more information.

Warranty:

• Protimeter instruments come with a 2 year warranty. It does not include wear and tear of included accessories.

How it Works - Five-In-One Moisture Measurement System

In-situ Relative Humidiy Testing

Mini humidity probes are placed in holes in the concrete slab to 40% depth and sealed where they acclimatise to the acutal relative humidty of the concrete slab. The instrument is connected to each probe in turn by a cable to take the humidity readings. The measurement presentaion helps the user to:

• Determine the actual RH reading of the concrete slab
• Perform tests as required by ASTM F2170
• Determine if a slab is ready for flooring application according to manufacturer specifications

Search Mode Non Invasive

Search mode is used to assess the moisture level beneath the surface of solid walls and floors independently of the surface conditions. When held against the surface, the instrument transmits a signal into the material. The relative moisture level is shown on the digital display. The measurement presentaion helps the user to:

• Look for moisture behind ceramic tile, water stains, tile and vinyl floor coverings, wood, drywall, gyprock, plaster, masonry, concrete and concrete block
• Assess, in relative terms, if the material is dry, borderline or damp condition and map the problem numerically
• Non-invasive pinless radio frequency (RF) finds moisture from ¾” (19mm) to 5” (120mm) below the surface
• This mode of measurement is not adversely affected by the presence of surface moisture

Note: Metal additives in concrete or foil linings can create false positive readings

Measure Mode Pin-Type

This mode diagnoses the extent of moisture intrusion for damage assessment and monitors drying out of building structures. Measure mode readings are precise and specific to the immediate area of contact of the electrodes.

• Use built-in pind or plug in the heavy duty moisture probe for measuring in hard-to-reach areas
• Use accessories, such as hammer probes, to measure at depth
• Deep wall pin-type probes establish the presence of moisture in wall cavity insulation, sub and surface structures
• Other probes are available for EIFS, wood floors, baseboards and more
• Measures moisture in wood and wood floors, subfloors, drywall, gyprock, concrete and concrete block, stucco, plaster, masonry and EIFS

Hygrometry

This mode measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems. Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dew point (condensation) and grains per pound, as well as multiple psychrometric calculations

• Allows measurement of equipment such as dehumidifiers
• Measures equilibrium relative humidity in concrete floors using the in situ probe method or humidity box
• Use to detect conditions for mold and fungus growth, that can lead to unhealthy living conditions

Surface Temperature (IR)

This mode checks surface temperature, utilizing a laser pointer, to calculate proximity to dew point.

PCWI is an authorised distributor and stockist of the Protimeter range in Australia, shipping overnight country wide and able to provide direct factory support. Contact us for any questions or support on Protimeter products